What if the power button on my OmiCam fails

If you encounter power button failures,
please refer to the following instruction,
(1) Remove the OmiCam case
(2) Check the power connector
(3) Add the plastic tape on the power button inside
(4) Assemble the OmiCam
     PS. Please note to test the camera function before step2, otherwise you have to take apart of back case and it might damage the latch of the case.
If you are kickstarter/Indiegogo backers, please use the plastic tape we provided in our repair kit.
Or you could buy the plastic transparent and cut the suitable size and attach the 3M double-side adhesive as the alternatives

What if my SD Card is stuck in OmiCam

If your SD card is stuck in OmiCam, please refer to the following instruction,
(1) Remove the OmiCam case
(2) Remove the stuck SD Card from the camera
Then check if the SD card could be inserted into slot and take it out again.
If it is stuck in the slot. then you might need to do some extra-work to fix it.
    Way1 Enlarge the SD card slot (please see the following video link)
   Way2 Check the metal SD slot and make it flat.
After fixing, please check if SD card could be successfully inserted and taken off.
(3) Assemble the OmiCam
     PS. Please note to test the camera function before step2, otherwise you have to take apart of back case and it might damage the latch of the case.